Epoxy.com Product #31 Medium Viscosity Low Mod epoxy resin system.

Skip Navigation Links

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Polyurethane Systems] [Garage Floor] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Epoxy.com Product #31

Medium Viscosity Low Modulus Epoxy Resin Mortar System


DESCRIPTION

Epoxy.com Product #31 Medium Viscosity Low Modulus Epoxy Resin Mortar System is a two component, 100% solids, Zero (0) VOC moisture insensitive epoxy resin system mixed at a 2:1 ratio. Its low modulus of elasticity permits greater "give" under stress from impact and thermal change. When Components "A" and "B" are mixed together, color will be light straw. Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Mortar Resin exceeds the requirements of ASTM C-881-02, Types I, IV & V, Grade 2, Class B & C.

ADVANTAGES

Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Mortar Resin System will cure at ambient temperatures as low as 40°F or greater.

WHERE TO USE

Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Mortar Resin System is used in either wet or dry environments for floor toppings, grouting of anchor bolts and under machine base plates, patching and skid resistant surfaces.

PHYSICAL PROPERTIES

Viscosity @ 72°F2,500 cps minimum
Compressive Strength
   ASTM C 109 Mod. Neat
10,000 psi minimum, 7 days
Compressive Strength
   ASTM D 695 Neat
15,000 psi minimum, 7 days
With 3 parts of Epoxy.com Product #701 Filler
   ASTM C 109 Mod.
7,000 psi minimum, 7 days
Tensile Strength
   ASTM D 638 Neat
7,000 psi minimum, 7 days
Elongation, Neat11%, 7 days

Electrical Properties

Dielectric Strength, S/T
   Volt per Mil
440 - 465
Dielectric Constant
     60 HZ 3.4 - 3.5
     106 HZ

3.3 - 3.4

APPROXIMATE INITIAL CURE

POT LIFE

   24 hours @ 60°F 1.5 - 2 hours @ 50°F
   12 hours @ 70°F .5 - .75 hours @ 75°F
   6 hours @ 90°F 25 - .5 hours @ 90°F

MIXING

Combine two parts by volume of Component "A" with one part by volume of Component "B". The blend should be thoroughly mixed for at least three minutes, using a low speed, half-inch, electric drill with an Epoxy.com-Mixing Paddle.

If longer pot life is required, the mixed material may be poured into a mortar pan or any flat pan 1/2" + thick; this will dissipate the heat and extend the pot life for a longer working time.

SURFACE PREPARATION

The areas to receive the Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System should be free of liquid contaminants, dirt, grease and heavy laitance. It is recommended that sandblasting, waterblasting, or wire brushing be utilized for surface preparation. Surfaces may be dry or damp but free of standing water.

APPLICATION

As a Floor Topping

The floor should be primed with neat Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System at the rate of 100 sq. ft./gal. An epoxy mortar is made with 3½ parts Epoxy.com Product #75 Epoxy Resin Filler blended into the mixed epoxy. The mortar is spread with normal masonry tools and trowel finish.

Grouting of Anchor Bolts

All bolts should be cleaned to remove oil, rust, or any other contaminants. If the annular space is 1/8" or less, Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System is used in the neat state. When concrete strengths are in excess of 3,000 psi, depth of bolt embedment should be 10 diameters of bolt. When concrete strengths are less than 3,000 psi, depth of bolt embedment should be 15 diameters of bolt.

Patching

Prime the surface to be finished with neat mixed Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System. Combine 3-1/2 parts by volume of Epoxy.com Product #75 Epoxy Filler to 1 part by volume of Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System and mix thoroughly with Epoxy.com-Mixing Paddle. Apply to primed surface and screed level. If extra skidproofing is desired, immediately broadcast Epoxy.com Product #75 onto the surface at the rate of ½ lb. per square foot.

Skid Resistant Surfaces

For best results, a 3-coat application is recommended. Mix and apply Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin Systemfirst coat by brush, roller, squeegee or spray coat at the rate of 100 sq. ft./gal. Immediately broadcast Epoxy.com Product #75 Course Broadcast Aggregate onto surface at the rate of ¾ lb./sq. ft. Any Epoxy.com Product #75 Course Broadcast Aggregate that does not adhere may be removed by brush the next day. Apply top sealer coat of Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System. Allow to cure for 24 hours @ 70°F.

One gallon of Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System, when mixed with three parts of Epoxy.com Product #75 Filler, will produce approximately 600 cu. in. of grout or mortar, which will cover 16.5 sq. ft. of surface a thickness of ¼". When used as a coating, coverage will be approximately 70 to 120 sq. ft./gal., depending upon surface conditions.

SHELF LIFE

2 years

LIMITATIONS

Epoxy resin (A Component) may crystallize. Heating material to 120°F and stirring will reconstitute material to original condition. Allow to cool before using.

PACKAGING

Epoxy.com Product #31 Medium Viscosity Low Mod Epoxy Resin System is available in 3 gallon and 15 gallon units.

CAUTION

"A" Component: May cause skin sensitization or other allergic responses. Avoid inhalation of vapor. Use good ventilation particularly if material is heated or sprayed. Prevent all contact with skin or eyes. Wear protective clothing, goggles, gloves and/or barrier creams. If contact with skin occurs, wash immediately with soap and water. In case of contact with eyes, flush immediately with water and contact a physician.

"B" Component: CAUTION! DANGER! Causes severe burns. Contains alkaline amines, strong sensitizer. Do not get into eyes, on skin, or clothing. Avoid breathing vapor. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

FIRST AID

In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse. Discard contaminated shoes. Wear protective clothing, goggles, gloves, and/or barrier creams.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA


Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666   Accounting and Administration
                         Debby Lambert, CEO, and CFO
                          office@epoxy.com

352-489-1625   Fax line to all Departments
                          www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept Mastercard, Visa and American express

Copyright © 1994-2009 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]