Epoxy.com Product #402 2-Component Chemcial Resistant UV Resistant and Heat Resistant Poly Urethane

Skip Navigation Links

[Home] [Catalog of Products] [Where to Start] [Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Polyurethane Systems] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]


Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Epoxy.com Product #402

Two Component Chemical Resistant Polyurethane Coating


Epoxy.com PRODUCT #402 is a two component chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention.

Epoxy.com PRODUCT #402 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities.

This Product is not for use in California


  • Excellent Abrasion Resistance
  • Excellent Chemical Resistance
  • UV Resistant - means a long life even in direct sunlight
  • Excellent Color Stability - Pigmented Version
  • Clear Version Resists Ambering Even in the Brightest Sunlight
  • Exterior and Interior Uses
  • May be used on both Horizontal and Vertical Applications


Surface must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast immediately prior to application.


Prime: For best bond to properly prepared surface, use Epoxy.com Product #899 Primer.

Body: Apply Epoxy.com PRODUCT #402 with brush, roller (short napped), or squeegee followed with back rolling to get recommended thickness (3 mils DFT).

Finish: Apply top coat as required (minimum 3 mils DFT).

Epoxy.com PRODUCT #402 is also available in the following forms:

  • As a slip or skid resistant finish using a non-skid additive in the finish.
  • As an electrostatic dissipating finish version - Epoxy.com Product #675


Surface must be dry. Minimum application temperature of 40°F (Contact Epoxy.com Technical Support for Low Temperature Cure). Maximum application temperature of 1000F. Avoid applications on surfaces without effective vapor barriers.


Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.


All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

Physical Properties

Color Standard colors for this product are:
Clear (satin and gloss), White #001,
Light Gray #100, White Sand #210,
Taupe #300,Mocha #400, Caramel #420,
& Brick Red #900.
Gloss, 60°F 85-100
Mix Ratio     2Ato 1B by volume
Pot Life 30-40 minutes @ 70°F
VOC 405 gm/liter
Solids Content, % volume    56.0
Coverage 300 ft2/gal @ 3 mils DFT


10-20 mil film 1O~14 hrs
Light Traffic 16 hrs
Ultimate Cure @ 740F
5 days






Acetic Acid-5% L Iodine R
Acetone L Lactic Acid-15% R
Betadine R Methyl Ethyl Ketone L
Bleach L Nitric Acid-10% R
Citric Acid-30% R Skydrol R
Crude Oil R Sodium Hydroxid-50% R
Diesel Fuel R Sulfuric Acid-20% R
Ethylene Glycol R Toluene R
Fafty Acids L Urea R
Gasoline R Vinegar L
Hydrochloric Acid-15% R Xylene R
R= Recommended for continuous Service
L=Limited recommendation, occasional spills


Adhesion to concrete ACI Committee 403 200 psi (concrete fails)
Abrasion Resistance ASTM-C501 30-40 mg loss (CS-17 wheel, 1 kg load, 1000 cycles)
Service Temperature MIL- D-3134F 160°F (immersion) 250°F (dry heat)
Impact Resistance MTI-D-3134F ss 4.7.5 Withstands 16ft./lbs. no cracking, delamination or chipping
Elevated Temperature Resistance MIL-D-3134F ss 4.7.3   No slip or flow at required temperatures at 158°F
Water Absorption (24. hr. immersion) ASTM-D-670-63 0.10% maximum
Color Chart HereStandard colors for this product are: White #001, Light Gray #100, White Sand #210, Taupe #300, Mocha #400, Caramel #420, & Brick Red #900.  The other colors listed to the left are available on on orders of 30 gallons or more.

Click the picture of color card below  for a larger version of this picture of the color chart.
Please note:  The picture to the right is a photographic reproduction of the color card for this product.  The photo reproduction process and your monitor and/or printer will change these colors.  This chart is to give you an idea of the colors available and not intended for critical color selections.

Download this file in Adobe Acrobat  format for formal presentation.

Skip Navigation Links

Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 

352-489-1666   Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept Mastercard, Visa and American express

Copyright © 1994-2009 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form]