Industrial Flooring


[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Systems] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers and Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format ] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980  

                                                   

 

 


Seamless Industrial Flooring


Editors Note:  This page and many other pages on this site contain picture thumbnails. Thumbnails are smaller versions of larger pictures.  Thumbnails are used to speed the loading of a web page.  To view the larger version of these thumbnails, simply left click the thumbnails the same way that you would click any other link.  The larger version of the picture will then load.

Overview
Experience
Flooring
Coatings and Toppings
Floor Primers
Accessories and Fillers
Floor Sealers
 

Overview

Epoxy.com a division of Epoxy Systems, Inc. offers a wide variety of Seamless Industrial Flooring Materials. Your industrial flooring needs may be as simple and inexpensive as Epoxy.com Product #850 (50% Solids - Penetrating Epoxy Sealer). It may require special materials like  Epoxy.com Vinyl Ester Systems, Epoxy.com Product #630 or #633 Epoxy Novolac Coating, or one of our other special flooring products.

Your requirements may require decorative materials like Epoxy.com Product  #66 #67 & 68 Colored Aggregates or Epoxy.com Seamless Resurfacing Chips. Both are very durable, and both can produce stunning results.

 

Proven Experience

Epoxy.com can assist with it's large store of experience. Epoxy.com a division of Epoxy Systems, Inc. are Engineers, Contractors, and Compounders. Most technical service is handled by the Owners of Epoxy Systems, Inc., who continue to work the Engineering, Contracting, and Formulating side of the business. If a product does not exactingly meet the requirements of the Engineering and Contracting side of our business, it will never get to you as an outside customer. All of our products have been tested completely by our Engineers, and installation staff, before the product is offered to you. Let us put our decades of experience to work for you.

 

Products Typically Used for Epoxy.com Flooring

Most of Epoxy.com Coatings can also be used to make seamless floors. Some of the Seamless Flooring Systems below will also benefit from the use of a Primer. Contact Epoxy.com Technical Support for details.

  • Epoxy.com  Product #10  a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches.
  • Product #10FAST Lo-Mod Adhesive -Fast Cure
  • Product #10COLD Lo-Mod Adhesive Cold Temperature Cure
  • Epoxy.com Product #11 a 100% solids flexible epoxy joint filler for saw-cut joints of concrete slabs on grade, or to repair existing slabs. Product #11 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.
  • Epoxy.com Product #12 a two component, seamless 100% solids epoxy primer system with High Chemical Resistance and High Bond Strength. The epoxy may be applied as a primer for most High End Industrial coatings, like Epoxies, MMA, Polyurethane's, Vinyl Esters, Polyesters, etc.
  • Epoxy.com Product #15 Chemical Resistant Flooring Resin - a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces.
  • Product #16 Epoxy Mortar Resin - a two-component, 100% solids epoxy resin system, mixed at a 1:1 ratio by volume. Epoxy.com Product #16, mixed with up to 3 parts dry EpoxySystems? Product #75 Filler produces an economical, high-strength epoxy mortar. Product #16 exceeds the requirements of ASTM C-881-78, Grade II, Classes A, B & C, Types I & III. Product #16 is recommended for use in dry environments only.
  • Product #17 Decorative Stone Overlays -  a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired.
  • Product #18 General Purpose Epoxy - a hard set epoxy compound formulated for general use. Product #18 cures at room temperature and is a low viscosity system. This durable, resilient material requires no post curing to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this product easy to use. Product #18 solves many difficult bonding, and epoxy mortar problems. Product has the ability to bond to a variety of substrates including cannot dry and hard to dry surfaces.
  • Product #19 Epoxy Mortar - a multi-function liquid applied, 100% solids epoxy binder and mortar system with excellent wear, and chemical resistance. Product #19 is an excellent general purpose material with excellent clarity and color retention. It is essentially odorless and so it can be used in occupied areas.
  • Product #20 Epoxy Grout - a moisture insensitive, two-component, 100% solids epoxy resin system manufactured specifically for use in temperatures of 40?F and below. It is recommended for injection or anchor-bolt grouting in the neat state or as a mortar when mixed with up to 3 1/4 parts of Product #76 -Epoxy Filler (by volume). PRODUCT #20 exceeds most requirements of ASTM C-881-90, Types I, Grade 1, Class A.
  • Product #21 Pumpable Mortar can be used underwater - a Pumpable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use in marine environments, but can be used in wet or dry strippable form applications. #21 can be pumped or poured into the void created between the existing structure and the Epoxy.com Corrosion Free Jacket. Dewatering is not required.
  • Product # 22 Underwater Epoxy Mortar - Pourable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use with the Epoxy.com Fiberglass Systems & Shapes. Can also be used as self-leveling flooring.
  • Product #23 - Similar to #22 but in 1:1 mix ratio
  • Product #24 Pigmented Mortar - is a multipurpose colored epoxy binder for EpoxySystems? Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.
  • Product #24 Fast Pigmented Mortar - Fast Cure
  • Product #24 Cold  Pigmented Mortar - Cold Temperature Cure
  • Product #25 Epoxy Mortar Kit standard - a 100% solids epoxy resin and specially selected aggregate system. Units are preproportioned for ease of mixing and use on the jobsite. It is  a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts.
  • Product #26 Epoxy Mortar Kit -  a 100% solids epoxy resin and specially selected aggregate system which produces a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts. It is designed for floor resurfacing where high strength and short down time are needed. Units are preproportioned for ease of mixing and use on the jobsite.
  • Product #27 Slow Cure Mortar
  • Product #28 Epoxy Mortar - Honey Clear Mortar 4:1 Ratio a multipurpose colored epoxy binder for EpoxySystems? Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.
  • Product #29 Cold Temperature Cure Mortar  is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35?F. They are often used in coolers and food preparation areas that require constant low temperatures. Product #29 Cold Temperature Cure EPOXY MORTAR is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.
  • EpoxySystems? Product #100 uses a unique epoxy technology which allows the contractor to install epoxy systems on new concrete (4-5 days old) without fear of moisture entrapment. Product #100 Exhibits greater than 100 times the permeability of standard epoxy slurries and mortars. Product #100 is used as a base for EpoxySystems? Chip and Quartz systems and as a binder for EpoxySystems? Resinous Mortar Systems, when moisture is a concern.
  • Product #203 Cold Temperature Cure Polymeric Primer - a specially formulated primer for cold temperature applications. Able to cure at temperatures as low as 35?F. It is often used in coolers and food preparation areas that require constant low temperatures. It is frequently used in room temperature applications to meet super-fast cure, limited shutdown needs
  • Product #204 Cold Temperature Cure Polymeric Coating - is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35?F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.
  • Product #205 Polymeric Flooring Resin
  • Product #206 Cold Temperature Cure Pigmented Polymeric Flooring Resin is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35?F. It is often used in coolers and food preparation areas that require constant low temperatures. Product #206 Cold Temperature Cure POLYMERIC MORTAR is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Is available in clear or colors.
  • EpoxySystems'? Product #315 Polymeric Multi-Colored Flake Floor Resurfacing System
  • Product #315BC Polymeric Coating and Base Coat for the 315Chip Flooring System, It can also be used as a stand alone coating.
  • Product #315BC - Fast  Same as Product #315BC Polymeric Coating for  Base Coat for the 315Chip Flooring System , but with a fast cure.
  • Product #315BC-Cold  Same as Product #315BC Polymeric Coating for  Base Coat for the 315Chip Flooring System , but with a cold temperature cure.
  • Product #316 Fast Set Flooring - a 100 % solids fast setting two-component epoxy resin system. Is made to set fast even in temperatures below freezing. It is recommended for flooring, injection or anchor-bolt grouting in the neat state or as a mortar when mixed #75 Filler. It exceeds most requirements of ASTM C-881-99, Types I and IV , Grade 1, Class A.
  •  PRODUCT #400Chemical Resistant Urethane is a two component, chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.  It can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors.  It is used as a finish coating option for most EpoxySystems? Flooring Systems.
  • Product #401 Urethane Coating - a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. It is a superior coating that provides the ultimate in weather resistance. It offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions.
  • Product #402 Urethane - a two component  chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities.
  • 409 Traffic Bearing Membrane  is a Resilient Traffic Bearing Membrane is a 100% solids, ambient cure impermeable elastomer. PRODUCT #409 is resistant to moisture, oils, mild acids, gasoline, and alkalies. PRODUCT #409 when applied to concrete or other surfaces, is resilient and accommodates movement in concrete substrates. PRODUCT #409 is used as a traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions.
  • Product #410 Urethane Traffic Bearing Membrane System is a tough, resilient system with excellent elongation. It is applied as a 3-step system - consisting of a primer, traffic bearing membrane - 2 coats, and sealer. It cures at ambient temperatures and is impermeable to moisture, oils, mild adds, gasoline, and alkalies.
  • PRODUCT #674- Electrostatic Dissipative Urethane Coating   is a two component, Electro Static Dissipative chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. EPOXYSYSTEMS? PRODUCT #674 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, EPOXYSYSTEMS? PRODUCT #674 is used as a finish coating option for most EpoxySystems? Flooring Systems.
  • Product #675 Electrostatic Dissipating Water Borne Epoxy Topcoat-a pigmented, water emulsion epoxy electro-static dissipative finish designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. It has very low odor and can be used in occupied areas as a finish sealer in Thin-Film Electro-Static Dissipative Coating Systems.
  • Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion.
  • Product #1501 Orange Peal Mortar Regular Cure
  • Product #1501Fast- Orange Peal Mortar Fast Cure
  • Product #1501Cold- Orange Peal Mortar Cold Temperature Cure
  • Product #1502 Cove Resin
  • Product #1502Fast- Cove Resin Fast Set
  • Product #1502Cold - Cove Resin Cold Temperature Cure
  • Product #1503- Epoxy Mortar Resin with Fly Ash
  • Product #1503 Fast- Epoxy Mortar Resin with Fly Ash, Fast Cure
  • Product #1503Cold - Epoxy Mortar Resin with Fly Ash, Cold Temperature Cure
  • Product #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities.
     
  • Methyl Methacrylate - MMA
    • Product #680 MMA Polymer Concrete  is a Polymer Concrete methyl methacrylate (mma) reactive resin is used as a binder to develop polymer concrete which produces extremely high strength and chemical resistance with an abrasion resistant surface. It  is prepackaged and preproportioned for easy mixing and placing at the job site. The liquid polymer and the preproportioned hardener filler is mixed either in the polyethylene bag or in a mortar mixer.
    • Product #681 MMA Primer for MMA Polymer Concrete
    • Product #682 MMA Polymer Concrete High Molecular Weight  is a second generation polymer concrete. PRODUCT #682 is non-hazardous, odorless and a non red label product. The monomer has a flash point greater than 200?F. PRODUCT #682 exhibits excellent physical properties and no shrinkage on curing. PRODUCT #682 provides superior chemical resistance to all portland cement concretes.
    • Product #683 MMA High Molecular Weight Primer for MMA Polymer Concrete High Molecular Weight
    • Product #684 Crack Welder/Sealer is a High-Molecular Weight Methacrylate, specifically formulated to seal new or hardened cracked concrete and masonry surfaces. PRODUCT #684 is a three component, low viscosity, monomeric penetrating sealer, ideally suited to prevent water, chloride or other deleterious liquids from penetrating concrete. PRODUCT #684 is used to seal new or existing concrete. PRODUCT #684 is used to arrest concrete deterioration due to alkali silica reaction of Portland cement concrete.
    • Product #690 All Purpose MMA Primer and Mortar
       

Products typically as Epoxy.com Flooring Accessory Products and Fillers

Sealers & Primers

bullet Product #40 Silane Sealer - a clear, one (1) component sealer that provides excellent protection to concrete against attack from wet/dry, freeze/thaw cycles, and de-icing chemicals. It provides a hydrophobic "water-shedding" effect to masonry surfaces. It is a penetrating sealer that is repellent to liquid water but permeable to water vapor: a "breathable" sealer.
bullet Product #41 Silane Sealer -  Similar to #40 but with 40% Solids.
bullet Product #80 Acrylic Sealer - a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Epoxy.com ACRYLIC SEALER provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, Epoxy.com ACRYLIC SEALER is an excellent choice for both interior and exterior applications.
bullet Epoxy.com Product #201 Oil Stop Primer a two component, epoxy-amine undercoating designed to be compatible with petroleum based oil and greases. In many instances petroleum can penetrate the surface of concrete floors to the extent that the oil may not be removed by surface cleaning. If untreated, this oil may migrate back to the surface to cause a delamination.
bullet Product #223 Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is easily pigmented.
bullet Epoxy.com Damp Primer-Sealer
bullet Epoxy.com Product #850 (50% Solids - Penetrating Epoxy Sealer)
bullet Product #690 All Purpose MMA Primer and Mortar
bullet Product #801 Fast Set Acrylic Sealer
bullet Product #810 Two Component Polyurethane Primer for Polyurea Coatings
bullet Product #824 Concrete Stain and Coating is a one component, water-repellant concrete stain. EPOXYSYSTEMS? PRODUCT #824 penetrates existing concrete and imparts color and uniformity the surface without affecting the natural texture. Standard colors are white and gray many other colors of concrete are available.
bullet Product #825 Epoxy Floor Sealer is a non-rewettable, polymer emulsion formulated for use with fast or normal setting floor underlayments.
bullet Product #826 Floor Curing Agent - Minimum purchase of 10 each 55 gallon drums required.
bullet Product #843 - High Solids Epoxy Primer
bullet Product 870 (65% Solids - Penetrating Epoxy Sealer-  is a two-component penetrating epoxy sealer (with very high solids) designed for superior protection of new concrete or for prolonging the serviceability of partially-deteriorated concrete. The sealer is a low to medium viscosity material and is capable of providing an effective membrane barrier to inhibit moisture migration and corrosive chemical penetration. In the cured state Epoxy.com  Product #870 allows moisture vapor transmission; it seals off moisture entry but still allows the concrete to breath. When applied to concrete placed and finished in accordance with standards defined in ACI 201 (Guide to Durable Concrete), Product #870 greatly improves wear resistance of the concrete surface, slows down the corrosion of reinforcing steel and adds many years' life to the structure. Product #870 has a solids content of over 65% after curing. It may be applied to dry surfaces at temperatures of 40°F  or above.
bullet Product #851 Epoxy Siloxane
bullet Product #877 Zinc Rich Primer
bullet Product #879 Galvanized and Aluminum Primer
bullet Product #899 Epoxy Primer - a damp primer the is a 100% solids Low-Mod Low Viscosity Primer and Sealer. It may be used as a primer for any Epoxy.com product, or as a stand alone sealer.
bullet Product #950 Joint Sealant Primer
bullet Product #1100 Rewetting Adhesion Promoter
bullet Product #1200 Epoxy Zinc Rich Primer
 

 

Here is a listing of pages added automatically by the web server on Industrial Flooring

Hit Counter

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666   Accounting and Administration
                          Debby Lambert, CEO, and CFO
                          office@epoxy.com 

352-489-1625   Fax line to all Departments
                         www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

MasterCard, Visa, and American Express logo

Copyright © 1994-2009 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com  within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Systems] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers and Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format ] [MSDS in Acrobat Format] [Online Ordering Authorization Form]


Hit Counter

 

Secure Login