Epoxy.com Waterproofing Systems

Skip Navigation Links

[Home] [Catalog of Products] [Where to Start] [Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Polyurethane Systems] [Garage Floor] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]


Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Waterproofing Materials
Epoxy, Urethanes and More

Almost any of our products can be used for waterproofing. 

Here are some of the products that are used the most in waterproofing applications:

Gel Adhesives

One big advantage of using a gel adhesive as a waterproofing system is that it goes on thick. These materials are the consistency of peanut butter, so you can build a thick layer exactly where you need it

  • Epoxy.com Product #5 Fast Set Gel Waterproof Adhesive is a 100% solids high-mod epoxy waterproof gel adhesive used for vertical and overhead waterproofing applications and structural repairs. It is also used as a grout for anchor bolts, dowels and rebar.  Epoxy.com Product #5 Fast Setting Gel Waterproofing Adhesive is used when you need a fast set epoxy with a quick turn around time.
  • Epoxy.com Product#6 Gel - Normal Setting Waterproof Adhesive  is a high-mod epoxy gel waterproofing adhesive used for vertical and overhead waterproofing, bonding applications and structural repairs. It is also used as a grout for anchor bolts, dowels and rebar. Epoxy.com Product #6 normal setting waterproofing gel adhesive balances decent potlife with a reasonable cure time.
  • Epoxy.com Product #6SC Long Pot life Adhesive  produces a non-sagging material that is ideal for repairs on vertical or overhead surfaces. PRODUCT #6SC meets or exceeds the requirements of ASTM - C881-87, Types I, II, and IV, Grade 3 Class "B" and "C".  If you need to do the job of Epoxy.com Product #5 or Epoxy.com Product #6, but need a longer working time, this is the product. 
  • Epoxy.com Product #703 Semi-Flexible Gel Waterproof Adhesive is a non-sagging material that is ideal for repairs on vertical or overhead surfaces. It exceeds the requirements of ASTM C 881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F". The flexibility of the Epoxy.com Product #703 Semi-Flexible Gel Waterproofing Adhesive makes it ideal for waterproofing areas where some movement is anticipated, like block walls, and block wall foundations.
  • Epoxy.com Product #704 Emergency Waterproof Epoxy is a rapid setting, two component, 1:1 ratio epoxy adhesive. It sets in six minutes and can be put into service in one hour regardless of temperature. It was designed to bond metals, glass, concrete and wood in a matter of minutes.
  • Epoxy.com Product #705 Two Component Flexible Waterproof Adhesive is a two component flexible adhesive, formulated to bond PVC and plastics to various substrates. Epoxy.com Product #705 Two Component Flexible Waterproof Adhesive will adhere plastics to other plastics, concrete, steel, wood and masonry. Epoxy.com Product #705 Two Component Flexible Waterproof Adhesive is thixotropic and is easily applied by serrated trowel.
  • Epoxy.com Product #706 Heat Resistant Bonder/Mortar is a 100% solids, moisture insensitive waterproof epoxy adhesive and waterproof epoxy repair material that is an excellent choice when waterproofing . When A and B Components are mixed they produce a gel consistency similar to petroleum jelly, which will not sag or run on a vertical or overhead surface application, forming a watertight, waterproof bond.
  • Epoxy.com Product #707 Splash Zone & Under Water Epoxy  Paste is a moisture-insensitive, two-component, 100% solids waterproof epoxy-resin system. When Product #707 Splash Zone & Under Water Epoxy is mixed at a 1:1 ratio, by volume, this product produces a paste-like material that is ideal for protection or restoration of concrete, steel and timber piles and other structural elements in marine environments. This epoxy product is so waterproof, that it can be installed under warer
  • Epoxy.com Product #711 is 100% solids waterproof protective coating designed to provide cavitation, erosion and corrosion resistance to metallic and non-metallic surfaces. Epoxy.com Product #711 acts as a barrier against extremely harsh environmental factors such as low and high PH, temperatures extremes, dry and fluid particulate flow and corrosive chemical attack.   
  • Epoxy.com Product #712  a two component flexible100% solids waterproof epoxy  sealant, formulated to repair leaking electrical equipment and circuit breakers. It bonds tenaciously to ceramics, plastics, metals and most substrates.

Elastomeric Waterproofing Systems

Water Proofing Cracks, Joints and Pipe Penetrations

Urethane Systems

Epoxy Injection

  • Epoxy.com Product #301 Injection Resin, low Modulus  - a 100% solids low viscosity epoxy adhesive used to restore cracked structural concrete by the pressure injection method and to grout cracks in a horizontal plane by gravity.
  • Epoxy.com Product #301SC  a longer Potlife version of Product #301
  • Epoxy.com Product #301Cold a faster version of Product #301 typically used in Cold Temperature Cure applications, or where a very fast set is needed
  • Epoxy.com Product #302  Injection  a 100% solids low viscosity moisture insensitive epoxy adhesive used to restore cracked structural concrete by the pressure injection method and to grout cracks in a horizontal plane by gravity. 
  • Epoxy.com Product #303 Low Viscosity Epoxy Injection Resin  a is a two component, 100% solids, moisture insensitive epoxy resin system, mixed at a 2:1 ratio, with a viscosity of light-weight oil. Product #303 exceeds the requirements of ASTM C 881-87, Types I, II, Grade 1, Class "B" and "C". Use neat for grouting damp and dry cracks or as a penetrating sealer on concrete, and wood. May also be mixed with Special Fillers (Products #72-75), to create epoxy mortars. 
  • Epoxy.com Product #304 Injection Resin and Mortar Binder   is a moisture insensitive, two-component, 100% solids epoxy resin system designed specifically for use in temperatures of 40°F and below. It is recommended for injection or anchor-bolt grouting in the neat state or as a mortar when mixed with up to 3 1/4 parts of Epoxy.com Product #75 Filler (by volume). Epoxy.com Product #304 Injection Resin and Mortar Binder exceeds requirements of ASTM C-881-90, Types I, Grade 1, Class A.

Waterproof Joint Systems

Other Resources

See also: 100% solid Epoxy Coatings for waterproofing.

Skip Navigation Links
Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 

352-489-1666   Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept Mastercard, Visa and American express

Copyright © 1994-2009 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form]